① Diverter pulley 2:1 Process standard configuration; Equipped with telescopic rods for easy suspension outside the shaft. ② Climber adapter A dedicated adapter (exclusive to each manufacturer) can connect the climber and fasten it to the side of the car ceiling beam. ③ High speed climber LTD100-10P18 Electric Control Integrated Cable Climber, at a speed of 18m/min. ④ Safety tong trigger The Safety tong can be manually triggered to lock the platform; After using the secondary protective chain, the guide rail can be lifted using a climber. ⑤ Trigger adapter A dedicated adapter (exclusive to each manufacturer) can be connected to the safety gear trigger and fastened to the side of the car ceiling beam. ⑥ Steel Wire Rope and Rope Collection Bucket For climbers Ф 10.2 steel wire rope and its winding device; The length of the steel wire rope should be configured to at least twice of the shaft height. ⑦ Elevator car ceiling platform Aluminum protective railings should be installed around the platform. ⑧ Anti-derailment protection system The climber control box is equipped with an anti-derailment switch socket. The anti-derailment switch component should be connected to the climber and installed on the platform to support the guide rail laterally. ⑨ Safety tong assembly The second descent protection of the platform is achieved by manually triggering the Safety tong trigger or automatically triggering the speed limiter. ⑩ Diverter counter weight Keep the steel wire rope of the climber tightened and suspended, and maintain a 2:1 process mode without entangling the steel wire rope.

* The rated load capacity of this process is 2000kg, excluding the weight of the elevator car and device;
* This process is also be applicable for LTD200-14P12 climber.