① Heavy lifting hook 1:1process configuration; The end of the steel wire rope should be connected by aluminum riveting or standard wedge sleeve; Telescopic rods should be configured for easy suspension outside the shaft. ② Climber installation bracket The bracket is fastened to the middle of the car ceiling beam and can be equipped with climbers and safety locks. ③ Electric control integrated climber LTD100-10P9 electric control integrated climber, with a speed of 9m/min. ④ Overspeed safety lock OSL510 Overspeed safety lock with a rated load of 1000kg; The platform will automatically lock when it descends more than 30m/min; Ф 10.2 High strength steel wire rope should be used. ⑤ Steel Wire Rope For Ф 10.2 steel wire rope used for climbers, the length should be configured not less than the shaft height. ⑥ Elevator car ceiling platformt Aluminum protective railings should be installed around the platform. ⑦ Anti-derailment protection system The climber control box is equipped with an anti-derailment switch socket. The anti-derailment switch component should be connected to the climber and installed on the platform to support the guide rail laterally. ⑧ Safety tong assembly The second descent protection of the platform is achieved by manually triggering the Safety tong trigger or automatically triggering the speed limiter. ⑨ Heavy hammer Maintaining the safety lock wire rope vertically suspended.

* The rated load capacity of this process is 1000kg, excluding the weight of the elevator car and device;
* This process is also be applicable for LTD200-14P6 climber.